Comparison with original sandstone products.

It is far easier-cheaper to build your home with brick or hebel veneer and finish with stonefacing tiles to your own design

LIGHTWEIGHT 4-5kg Stonefacing tiles approx. $59 to $125m2 to lay

Original Sandstone very heavy 30-35kg and expensive, approx $275 to $500 m2 to lay

COST...CSR Hebel panels $45m2 DIY or use bricks installed $90m2
Blueboard or villaboard $13-20m2 DIY
Plus lightweight stonefacing tiles easy do-it-yourself, $55 to $75m2

BUILDING...Stonefacing tiles easy do-it-yourself labour at no cost.

Original sandstone blocks very heavy and expensive to lay.

DELIVERY...Reasonable lightweight and can get a lot delivered in easy to use boxes around site.

Original sandstone blocks very heavy, need two people to lift.

USING...Stonefacing tiles lightweight, can cut, work and use like normal sandstone and do different patterns and keystones to your satisfaction at a fraction of time and cost.

Original sandstone very time consuming and not easy to work with, lot of expensive waste.

SLAB DESIGN...Stonefacing tiles require only normal load bearing concrete. They also can be used on piering built structures.

Original sandstone requires very heavy and expensive load bearing footing design.

In all lightweight stonefacing tiles are far more economical than original sandstone to use. Please check out our website thoroughly for any queries.

IMPORTANT, guarantees are only as long as you have been in business

Go to Kit Homes for more info - click here